12
Remote Control
2 CONTROLS AND CONNECTORS
1 [TV CH–/+] buttons
Change channels on JVC TV.
2 [VOLUME–/+] buttons
Adjust the volume of a JVC TV.
3 [TV/VIDEO] button
No function.
4 [AUTO] button
Turns on and off the auto tracking facility.
[TRACKING –/+] buttons
Suppress the disturbances appearing on the
picture when a tape recorded on another machine
is played back(or put on slow motion back).
5 [REW] button
Rewinds the tape.
6 [REC] button
Recording operation differs from that of the main
unit.
Recording starts when the play button is pressed
while pressing this button.
7 [PLAY] button
Plays back the tape.
8 [OPERATE] button
Turns on and off a JVC TV.
9 [TV/VIDEO] button
Selects the input mode of a JVC TV.
0 [OPERATE] button
Turns on and off this unit.
! [FF] button
Fast forwards the tape.
@ [PAUSE/STILL] button
Pauses the recording or changes playback picture
to a still picture.
Cancelled by pressing the PLAY button.
# [STOP] button
Stops any operation of the VCR.
1¡
3
7¶8
OPERATE
OPERATE
TV CH
VOLUME TV/VIDEO
TV/VIDEO
AUTO TRACKING
TV
VIDEO
REMOTE CONTROL UNIT
To Next Page
Loading...
