JVC UX-S59 - Removing the CD Board

(No.MB409)1-17
3.1.23 Removing the CD board
(See Fig.34, 35)
(1) Removing the four screws W1 from the CD board and CD
mechanism holder. (See Fig.34)
(2) Disconnect the FFC cable W2 from the connector CN701
on the CD board. (See Fig.34)
(3) Disconnect the FFC cable W3 from the connector JW756
on the CD board. (See Fig.34)
(4) Disconnect the FFC cable W4 from the connector CN802
on the CD board. (See Fig.34)
(5) Disconnect the FFC cable W5 from the connector CN801
on the CD board. (See Fig.34)
(6) Disconnect the wire W8 from connector of the CD mecha-
nism "CMS". (See Fig.35)
Fig.34
Fig.35
W1
W1
W2
W3
W5
W4 W6
W7
W8