86
Video CD Operations
Adjusting the picture and sound to suit preferences
You can change the picture quality and select the prefered audio channel.
To adjust the picture quality [VFP]
■ During playback
1
Press
VFP
or
VIDEO FINE
PROCESSOR
on the front panel.
2
Within 10 seconds, select
the desired picture quality
by pressing
VFP
or
VIDEO FINE
PROCESSOR
on
the front panel.
Each time you press the button, the
picture quality changes as follows:
If you select [MANUAL], you can
adjust the level of sharpness of
the picture and noise reduction.
1.Use to select
SHARPNESS or NR LEVEL.
2.Use to adjust the level.
The selected of the picture
quality tab lights up in yellow.
NORMAL
SHARP
SOFT
MANUAL
SOFT MANUAL
LH
NR LEVEL
SHARPNESS
LH
SHARPNORMAL
NOTES
● To erase the VFP screen, press
ENTER
.
● The VFP screen disappears if there are no operations for more than 10
seconds.
To Next Page
Loading...
