JVL MAC050 - Page 289

JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 285
5.8 Expansion Module MAC00-FP2/FP4
5.8.15 Cables for the MAC00-FP4
The following cables equipped with M12 connector can be supplied by JVL.
Important: Please note that the cables are a standard type. They are not recommended for use in
cable chains or where the cable is repeatedly bent. If this is required, use a special robot
cable (2D or 3D cable). See also
Accessories, page 448 where additional M12 connec-
tors are shown.
MAC00-FP4 Connectors Description JVL Order no. Photo
“BUS1”
5-pin
Male
B-coded
“BUS2”
5-pin
Female
B-coded
“I/O”
8-pin
Female
“PWR”
5-pin
Male
X
RS232 Interface cable. Connects
directly from MAC00-FP4 to PC
Length: 5m (197 inch)
RS232-M12-1-5-8
X
Cable (Ø5.5mm) with M12 female
5-pin connector loose wire ends
0.35mm² (22AWG) and foil
screen.
Length: 5m (197 inch)
WI1000-
M12F5T05N
X Same as above but 20m (787 inch)
WI1000-
M12F5T20N
X
Cable with M12 male 8-pin
connector loose wire ends
0.22mm² (24AWG) and screen.
Length: 5m (197 inch)
WI1000-
M12M8T05N
X Same as above but 20m (787 inch)
WI1000-
M12M8T20N
X
Profibus DP cable with M12 male
5-
pin connector B-coded, loose ends
and screen.
Length: 5m (197 inch).
WI1026-
M12M5S05R
X Same as above but 15m (591 inch)
WI1026-
M12M5S15R
X
Profibus DP cable with M12 fe-
male
5-pin connector B-coded, loose
ends and screen.
Length: 5m (197 inch)
WI1026-
M12F5S05R
X Same as above but 15m (591 inch)
WI1026-
M12F5S15R
Loose connectors and termination resistor
X
Loose Profibus DP male M12
connector. B-coded.
Internal screw terminals.
WI1028-M12M5VC1
X
Loose Profibus DP female M12
connector. B-coded.
Internal screw terminals.
WI1028-M12F5VC1
X
Profibus DP male M12 termination
resistor. B-coded.
WI1028-M12M4STR3
Protection caps. Optional if connector is not used, to protect from dust / liquids.
X X
IP67 protection cap for M12
female connector.
WI1000-M12FCAP1
X X
IP67 protection cap for M12
male connector.
WI1000-M12MCAP1