JVL MAC050 - Page 309

JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 305
5.10 Expansion module MAC00-P4/P5
5.10.11 Expansion MAC00-P4 connector description
The MAC00-P4 offers IP65 protection when used in the MAC400 to MAC4500 and M12
connectors which makes it ideal for process control and automation applications where
no additional protection is desired. The M12 connectors offer solid mechanical protec
-
tion and are easy to unplug compared to modules with cable glands or DSUB connectors.
The connector layout:
(Continued next page)
“PWR” - Power input. M12 - 5pin male connector
Signal
name
Description
Pin
no.
JVL Ca-
ble
WI1000-
M12F5T0
5N
Isolation
group
P+ Main supply +18-32VDC. Connect with pin 2 * 1 Brown 1
P+ Main supply +18-32VDC. Connect with pin 1 * 2 White 1
P- Main supply ground. Connect with pin 5 * 3 Blue 1
CVI1 Output supply / Control voltage +18-32VDC. 4 Black 1
P- Main supply ground. Connect with pin 3 * 5 Grey 1
* Note: P+ and P- are each available at 2 terminals. Make sure that both terminals are connected in order
to split the supply current in 2 terminals and thereby avoid an overload of the connector.
Only MAC400-3000
Expansion module MAC00-P4 front plate
COM
Communication
M12 - 5pin female
connector including:
RS232 and Slave
RS485 interface *
TT1195GB
SLV
Slave Connector
M12 - 5pin male
connector including:
and supply
for the slave motor.
RS485 CVI2
CNT
Basic I/O’s
M12 - 12pin female
connector including:
4-20mA in- and out
and 2 outputs and 2
analogue inputs
PWR
Power supply
M12 - 5pin male
connector including:
(supply), and
(output supply) and
P+ CVI1
P-