Kaba C-lever compact

Installation instructions Product description
Kaba c-lever compact k2evo703en-2011-05 9
3 Product description
3.1 Scope of supply
The Kaba c-lever compact is supplied with the following accessories:
- 1 Kaba c-lever compact
- 1 inside handle (as per catalogue)
- 1 Direction pin
- 2 batteries, type AAA Lithium
- 1 spindle
- Various fixing materials
- 2 centring sleeves 7-8 mm
- 2 centring sleeves 7-9 mm
- 1 dismantling key
- 1 quick reference guide
External handles are not included in the scope of supply, however they can be
ordered at the same time from the catalogue!
3.2 Additional accessories
- Adapter pins, product number 1355-42A
- Programming cable, product number 1355-42
- Kaba 1460 Programmer
- Kaba media
- Kaba evolo Manager software
3.3 Preparatory measures
3.3.1 Door requirements
The door thickness must be between 39 mm and 94 mm.
3.3.2 Lock requirements
The Kaba c-lever compact can be used with most commercially available door
locks. Only use locks from established manufacturers, as this is the only way to
ensure that rosette drillings conform to the standards.
Locks with a split follower cannot be used!
To guarantee emergency opening with the help of the locking cylinder, door
locks with a key operated latch must be fitted!