5
Important: When you pump the handle, the lock will flash the Green
light once accompanied by a high pitched beep indicating that it is
“ready”—either for you to enter your valid access PIN, or for you to
start programming. If you do not pump the handle, there will be no
response from the lock and consequently there will be no access
granted.
You must instruct your EPS 2000 series lock/door users on how to
use this lock properly: they must always pump the front lever
before entering their access PIN to gain entry. If you do not pump
the handle, you will not get any feedback from the lock and conse-
quently there can be no access.
To Next Page
Loading...
Need help?
General