5 Operation
Kaco Gerätetechnik GmbH 12 Operator’s Instructions Powador
5 Accessories
KACO Gerätetechnik GmbH offers its customers a wide
range of useful accessories. The product range
includes devices of superb quality for monitoring,
display, data transfer and visualization.
Powador-Display
You wish to see what your installation is doing and
whether everything is the way it should be? Then
Powador-display is the right choice for you. Via an RF
module, the inverter transmits its data to the display,
where you can observe the daily curve or read the
current output or daily yield. You will be able to
recognize any problems in your installation very quickly.
The attractive display is suitable for use in home or
office surroundings.
Figure 5.1: Powador-Display
Powador-proLOG
You wish professional monitoring and data recording of
your installation? Powador-proLOG is the high-end
solution to provide error messages by SMS, fax or e-
mail, remote access to installation data, display of your
PV installation on the web or many other things – it’s
just no problem for Powador-proLOG. Up to 32 devices
can be connected to Powador-proLOG by means of the
RS485 interface.
Figure 5.2: Powador-proLOG
Powador-easyLOG
Powador-easyLOG is used to transmit the operating
data of your inverter via a wireless connection and
display such data either on the Powador-Display or on a
PC.
Figure 5.3:Powador-easyLOG
Powador -go
If you simply wish to know if your installation is working
properly Powador-go is the right choice for you. If your
PV installation or your modules stop producing current,
Powador-go-Set will provide an acoustic warning signal
after 24 hours. The entire processes are independent of
the inverter, so just lean back and relax – your
installation will tell you if there is a problem.
Figure 5.4: Powador-go
To Next Page
Loading...
Need help?
General