1 Operation
KACO Gerätetechnik GmbH 2 Operator’s Instructions Powador
General Remarks
With the inverter manufactured by KACO Gerätetechnik
GmbH you have purchased a device that excels by
highly reliable and powerful technology. You will benefit
from our long-standing experience in the field of current
inverter technology and power electronics.
Powador 01xi inverters are electrically isolated, robust
inverters, which are operated without any blowers and
offer a high degree of efficiency. An illuminated display
and intuitive menu guidance enables you to display the
most important grid feeding data of the inverter. The
inverter data can be transmitted to a PC for
visualization.
Protection class IP 54 makes the inverters ready for use
in any kind of environment – our inverters are even
suitable for use in agricultural and industrial
applications.
1 About this document
The following information will guide you through the
entire operator’s manual. Further documents will be
valid in conjunction with these operating and installation
instructions.
We shall not be liable for any damage caused by
non-adherence to the instructions given in this
manual.
Pertaining documents
During the inverter installation please observe all
assembly and installation instructions for components
and other parts of the system. These instructions are
shipped together with the respective installation
components or supplementary equipment.
1.1 Attachment and Maintenance of documents
Please keep these operating and installation
instructions in a safe place to ensure that they are
available if needed.
1.2 Symbols used in this document
Please observe the safety information provided in this
manual when operating your inverter!
1.3 CE Certification
CE labeling is used to document that the Powador
inverter indicated on the type label meets the
fundamental requirements according to the following
directives:
- Directive concerning Electromagnetic Compatibility
with Class B (Council Directive 89/336/EWG)
- Low Voltage Directive (Council Directive 73/23/EWG)
1.4 Type Label
The type label indicating the exact device description is
located on the support plate at the underside of the
enclosure.
2 Safety information and
instructions
Regulations concerning the prevention of accidents
The inverter must be installed by an approved skilled
electrician who is responsible for the adherence to
existing standards and regulations.
The proper and safe operation of the device/instrument
requires proper transportation, storage, erection and
assembly, as well as careful operation and
maintenance.
Only personnel who have read and fully understood
these operating instructions shall be authorized to
operate the inverter.
Danger!
Danger due to lethal voltages!
Hazardous live voltages are present
inside the device/instrument and power
lines. Therefore, the device/instrument
must only be installed and opened by a
skilled electrician.
Even when the device/instrument is
switched off, dangerous live voltages
may still be present inside the
instrument.
Danger
Important!
Non-adherence to these
instructions may adversely affect
the operating convenience or
functionality of the device.
Note!
Useful information and remarks!
This symbol designates a required
action
Danger!
Lethal Hazard by Electric
Shock!
Danger
Caution!
Potential hazard for the product and
environment!
Caution
Warning!
Lethal Hazard!
Warning
To Next Page
Loading...
Need help?
General