Fig. 21 Switching on and off in remote
1 «remote control» key
2
remote control
LED
1. Attach an easily seen notice that warns of remote machine operation.
DANGER!
This machine is remotely controlled and can start automatically at any time.
Tab. 41 Machine identification
2. Label the starting device in the remote control center as follows:
DANGER!
➤ Before starting, make sure that no one is working on the machine and that it can be safely started.
Tab. 42 Remote control identification
3. Press the «remote» key.
The
remote
LED lights. The machine can be remotely controlled.
8.4 Switching On and Off with the Clock
Precondition The clock is programmed.
8 Operation
8.4 Switching On and Off with the Clock
48
Service Manual Screw Compressor
ASD T Tri-Voltage 9_5721 06 USE
To Next Page
Loading...
Need help?
General
