Kalkhoff Suomi - Battery Information System; Checking the Battery Capacity; Checking the Battery Charge State

IV User Manual Pedelec with ont motor 15
Charging times at dierent temperatures
Long charging times
Battery may be
damaged
Li-ion recharge-
able battery
Optimum temperature range
for charging operation
-10 °C 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C
6.4 Battery information system
There is a control panel with ve LEDs and a button
("Push") on the side of the battery that faces outwards.
The LEDs light up if you press the "Push" button. Informa-
tion about the battery and its charge state is provided
based on the number of LEDs that light up and the way in
which they light up.
Charge state and battery capacity indicator
6.4.1 Checking the battery charge state
Press the "Push" button briey, the LEDs light up and dis-
play the current battery charge state.
DISPLAY BATTERY CHARGE STATE
5 LEDs light up ••••• 80 – 100%
4 LEDs light up •••• 60 – 80%
3 LEDs light up ••• 40 – 60%
2 LEDs light up •• 20 – 40%
1 LED lights up • 10 – 20%
1 LED ashes
¡
< 10%
no display – 0%
E: Battery is empty
F: Battery is ll
6.4.2 Checking the battery capacity
If you press the "Push" button for longer than ve sec-
onds, the LEDs show the current capacity of the battery.
Capacity of 18 Ah battery (example)
DISPLAY CAPACITY
5 LEDs light up ••••• 100 – 80%
4 LEDs light up •••• 80 – 60%
3 LEDs light up ••• 60 – 40%
2 LEDs light up •• 40 – 20%
1 LED lights up • 20 – 0%