Kalkhoff Suomi - Setting and Programming the LCD Display; Delete Trip Data; Delete Overall Data; Device Settings

V User Manual Impulse Pedelec 21
5.3 Setting and programming the LCD
display
By pressing the Set button, you can switch between the
various displays within the information area (named
“main menu” in the illustration). Pressing and holding the
Set button will take you om any display in the informa-
tion area/main menu to the menu sub-items
• Delete trip data
• Delete overall data
• Device settings
• Target cost
• Back
You can select the menu sub-items using the two arrow
keys on the control panel. You can conrm your selection
by pressing the Set button. The respective contents are
then displayed for you. You can also make changes to the
settings. In order to return to the information area/main
menu display om the menu sub-items, you must select
the menu item “Back” and conrm by pressing the Set
button.
5.3.1 Delete trip data /
Delete overall data
Under the menu sub-items “Delete trip data” and “Delete
overall data”, you can delete the kilometres indicated for
the current day trip and the total kilometres covered. If
you wish to do so, select the option “Yes” using the arrow
keys on the control panel and then press the Set button
to conrm your selection. Then you will be taken back to
the menu sub-item display once more. If you select and
conrm the option “No”, the information remains in place
and you are, likewise, taken back to the menu sub-item
display.
5.3.2 Device settings
Under the menu sub-item “Device settings”, you can
change the following display settings:
• Contrast (➠ 5.3.2.1)
• Brightness (➠ 5.3.2.2)
• Language (➠ 5.3.2.3)
• Wheel circumference (➠ 5.3.2.4)
• Unit (➠ 5.3.2.5)
• Name (➠ 5.3.2.6)
• Factory settings (➠ 5.3.2.7)
• Soware (➠ 5.3.2.8)
Using the two arrow keys on the control panel, you can
select the sub-items and conrm by pressing the Set but-
ton. The menu item “Back” will take you back to the main
menu.
5.3.2.1 Contrast
You can leave the contrast of the display at its preset
level or adjust it in 5% steps to between -35% to +20%
by pressing the two arrow keys. The change in contrast is
implemented immediately. Pressing the Set button con-
rms your selection and then takes you back to the menu
sub-item display.
5.3.2.2 Brightness
You can leave the brightness of the display at its preset
level or adjust it in 5% steps to between 0% and 50% by
pressing the two arrow keys. The change in brightness is
implemented immediately. Pressing the Set button con-
rms your selection and then takes you back to the menu
sub-item display.
5.3.2.3 Language
You can choose to have the information shown on the
display in the following languages:
• Deutsch
• English
• Francais
• Nederlands
• Espanol
• Italiano
• Suomi
• Dansk
You can select the relevant language using the two arrow
keys. Pressing the Set button conrms your selection and
then takes you back to the menu sub-item display.