Venkon
Assembly, installation and operating instructions
24
Fig.9: Fold up the casing and press in place
Press the casing upwards and insert the retaining tabs into
the slots of the main support panels of the basic unit.
Fig.10: Fix the casing with screws
Screw the casing to the basic unit with 2 countersunk screws.
After screwing the casing in place refit he air inlet grille
[}000].
Fig.11: Install the air outlet grille
Insert the air outlet grille and use 2 flat-head screws to attach
it to the basic unit.
To Next Page
Loading...
