3Kamstrup A/S • 55122412_A1_GB_2019-03
MULTICAL® 803 & ULTRAFLOW®
Contents
1 In general 4
2 Mounting of temperature sensors 5
2.1 Short direct sensor (DS) 5
2.3 Pocket sensor with connection head (PL) 6
2.2 Pocket sensor (PL) 6
3 Mounting of flow sensor 7
3.1 Mounting of couplings and short direct sensor in flow sensor 7
3.2 Mounting of ULTRAFLOW® ≤ DN125 8
3.3 Mounting of ULTRAFLOW® 54 ≥ DN150 8
3.4 Flow sensor position 9
3.5 Installations with two ULTRAFLOW® sensors 10
4 Mounting the calculator 11
4.1 Wall-mounting 11
4.2 Compact mounting 11
5 Electrical connection 12
5.1 Connection of temperature sensors 12
5.2 Connection of ULTRAFLOW® 13
5.3 Connection of other flow sensors 13
6 Connection of power supply 14
6.1 Mains supply 14
6.2 Backup battery 15
7 Testing of function 15
8 Info code 16
9 Communication modules 17
9.1 Module overview 17
9.2 Pulse inputs 17
9.3 Pulse outputs 18
9.4 Data + pulse inputs, type HC-003-10 18
9.5 Data + pulse outputs, type HC-003-11 18
9.6 M-Bus + pulse inputs, type HC-003-20 19
9.7 M-Bus + pulse outputs, type HC-003-21 19
9.8 M-Bus + Thermal Disconnect, type HC-003-22 19
9.9 Wireless M-Bus + pulse inputs, type HC-003-30 20
9.10 Wireless M-Bus + pulse outputs, type HC-003-31 20
9.11 Analog outputs, type HC-003-40 20
9.12 Analog inputs, type HC-003-41 21
9.13 PQT Controller, type HC-003-43 21
9.14 LON TP/FT + pulse inputs, type HC-003-60 22
9.15 BACnet MS/TP + pulse inputs, type HC-003-66 22
9.16 Modbus RTU + pulse inputs, type HC-003-67 22
9.17 2G/4G network module + pulse inputs, type HC-003-80 23
9.18 Modbus/KMP TCP/IP + pulse inputs, type HC-003-82 23
10 Setup via front keys 24
To Next Page
Loading...
