KANE988 OVERVIEW
Your KANE988 combustion analyser uses up to 6 electrochemical
sensors and our proprietary NDIR 3 gas detection bench to measure up
to 8 gases and 9 sensors.
Your KANE988 has a colour graphical display and intuitive keypad to provide
clear information and simple operation.
Your KANE988 is independently certified to EN50379 parts 1-3 by TUV.
Your KANE988 measures (sensor dependent):
• Carbon Monoxide (CO)
• Oxygen (O2)
• Carbon Dioxide (CO2)
• Nitric Oxide (NO)
• Nitrogen Dioxide (NO2)
• Sulphur Dioxide (SO2)
• Hydrogen Sulphide (H2S)
• Hydrocarbons (HC)
• Pressure
• Differential Pressure
• Temperature
• Differential Temperature
Your KANE988 also calculates (sensor dependent):
• Nitrogen Oxides (NOx)
• CO/CO2 ratio
• Combustion Efficiency
• Losses
• Excess Air
• Poison Index (Pi)
• Airflow Pitot tube
Your KANE988 has an integral protective rubber cover and easy fit accessory
clip on rear above the battery compartment.
Your KANE988 flow detector system automatedly protects your analyser if a
blockage is detected in the sampling system.
4 KANE988 MANUAL
To Next Page
Loading...
