SmartVision & SmartVision LITE – User Guide (Rev. 2.7) – Version 1943.4105 17
The alphanumeric keypad located under these control keys, is presented in three
rows of number keys organized from left to right as follows:
- First row: 1, 2, 3, star keys.
- Second row: 4, 5, 6, 0 keys.
- Third row: 7, 8, 9, # keys.
The alphanumeric keypad (key 1 to #) is used to enter text or characters depending
on the input field.
Each key gives access to several characters: number key "2" gives access to a,
b, c, 2, A (capital), B (capital), C (capital).
To select the appropriate character, press repeatedly the relevant number key to
access the various characters associated with this key.
Number key "1" is used to insert punctuation marks and number key “Hash
Mark” is used to insert a space.
The “star “ key is used to switch a character in uppercase or lowercase
Touchscreen interface
By default "Explore by touch" is activated in SmartVision. This feature has the
effect of modifying the behavior of the touch screen interface to suit the persons with
vision impairment. The rest of this section describes how to use the standard
touchscreen interface when that feature is disabled. To learn more about this feature
(how to enable/disable it) please refer to the "Accessibility mode" section.
Standard Touchscreen mode
The touchscreen helps you navigate through the screens from the tip of your finger.
Touch the screen with your fingertip to select an item, touch the entry window to
display the virtual keypad, type on it to write a message, or slide your finger up and
down to scroll the display.
To Next Page
Loading...
