Kapsys SmartVision - Page 55

SmartVision & SmartVision LITE – User Guide (Rev. 2.7) – Version 1943.4105 55
- "Caller Id alert": announces the name or phone number associated with an
incoming call.
- "Voicemail alert": announces an incoming message to your voice mail
- "Stop on shake": stops text-to-speech mode by shaking the handset
- "Stop on proximity": stops text-to-speech mode if the smartphone is closed
to your ear.
- "Speak when locked": enables text-to-speech when the unit is in screen off
mode.
The other accessibility typical options are:
- "Large text": increases the font size. This setting is also available in the
section about the Display.
- "Power button ends call": ends the ongoing call via the on off key.
- "Auto-rotate screen": toggles instantly between portrait/landscape depending
on the screen position. We recommend you leave this option inactive.
- "Speak passwords": enables to enter the password using text-to-speech. For
confidentiality reasons, you will need to use the earphones to enter your
password in text-to-speech mode.
- "Explore by touch": activates screen reading as well as specific gesture
commands for the visually impaired users.
- "Touch & hold delay": adjusts multi-tap detection speed on the touchscreen.
- "Install web scripts": authorises scripts to be installed on your web browser
to improve your accessibility.
- "Hearing aid compatibility (HAC)": increases the sound level for users with
impaired hearing.
- "Disable Android Keys": disables Android buttons such as "Menu", "Home
screen" and "Back". In such case, you should apply gesture commands on
the touchscreen or android keypad shortcuts.
- "Background color": allows you to select the color of the background in
menus and lists. Please note that this operation is not instantaneous and
requires a complete upgrade of the system
- « Play a beep after the validation of a character » allows you to play a beep
after the validation of a character into an entry field.
- « Make a vibration after the validation of a character » allows you to make
a vibration after the validation of a character into an entry field.
- « Validation timeout » allows you to set the timeout of the validation of a
character (0.5,1,2,3, or 4 seconds)
Please note: enable or disable "Explore by touch" feature is also available with
direct access via a long press on the “On Off” button.