CAN RANGER OPERATION
10
INSTALLATION
Refer to the KAR-TECH
INSTALLATION manual for
guidance on all aspects of
installation specific to your
truck. Additionally, refer to
the PINOUT sections in this
manual for hookup of the
harness.
All connections must be
properly insulated and sealed
to protect against shorts and
corrosion.
BEFORE APPLYING
POWER!
• Check power and ground
for proper polarity.
• Check the wiring harness
for possible shorts before
connecting to output
devices (i.e. valves and
relays) by checking each
mating pin terminal.
• Verify that the transmitter
battery is fully charged. If
it is low, performance may
be erratic.
• Read the rest of this
manual.
To Next Page
Loading...
