Kasanova E-mootika - Brake Handle; Disk Brake Type Brake

77
E-MOOTIKA
INSTRUCTION MANUAL
ENG
4.6.1 Brake handle
The structure of the Brake
handle is as shown (in the
left drawing), and the left
Brake handle controls the
front brake and the right
Brake handle controls the
rear brake.
- The adjusting screw is used to adjust the distance between the
brake shoe block and the Rim.
- The effective stroke of the brake cable is about a half of the
distance between the handle of the Brake handle and the grip of the
Across handle Stems; if the brake is tight when the handle of the
Brake handle is almost approaching to the grip of the Across
handle Stems, the distance between the brake shoe block and the
Rim is too large, it needs to be adjusted.
4.6.2 Disk brake type brake
The braking system typically includes a Brake handle, brake (disk
brake, V brake and many other types of brakes) and brake cable.
1- Stroke adjusting bolt
2- Position adjusting bolt
3- Rocker arm
4- Permanent seat
5- Brake shoe block
6- Shoe block adjusting bolt
7- Permanent seat of brake line