Kasanova E-mootika - Use and Maintenance; Riding Technology; Routine Inspection of Electric Bike before Use

86
E-MOOTIKA
INSTRUCTION MANUAL
ENG
5. USE AND MAINTENANCE
5.1. Routine inspection of electric bike before use
1- Install the battery box in the slot of the battery box, open the power supply switch and
check whether the functions of all the electrical appliances are normal.
2- Safety inspection (see the notes to safe use in the Manual)
3- Check whether the governor switch handle rotates and is reset
exibly.
4- Check whether the braking power-off function and braking effect
are in good condition (dry braking distance 4m, wet braking distance 15m).
5.2. Everyday use and inspection of electric bike
In everyday use of the electric bike, a number of mechanical, electrical parts will be worn,
screws and other fasteners are also easy to loose and the functions of the electrical applian-
ces would be lost. If the occurrence of these phenomena is not noted, it is prone to failure,
and it is also prone to the risk when cycling, so drivers must be responsible for inspection and
maintenance in peacetime
.
5.3 Maintenance
In order to ensure trafc safety, from time to time, check whether
all the electrical appliances work properly, whether there is any
lost wire and whether mechanical parts are normal, and clean, wipe,
oil the chain, uted disc, ywheel and Derailleur regularly (consult
your supplier for the model of the oil product) so as to maintain the
normal function of each part at any time.
6. RIDING TECHNOLOGY
A correct cycling posture is the mother to safety: the riding posture is
determined by the position of gure and shadow of the contact point
(handlebar, seat, Pedal) of the bicyclist and bicycle.
However the posture is closely related to the height and size of the bicyclist. So a single-bi-
cycle cycling posture not only determines the efciency of muscle contraction movement,
but at the same time determines whether the bicyclist can manipulate the handlebar and
brake safely. Therefore, a correct cycling position is the mother to safety. The safe cycling
techniques are described one by one in the following:
- Adjust three points to suit your body; bicycling is just like doing the
clothes, and it is necessary to measure the gure and make adjustments. The method of
adjusting three points is a combination of bicycle sports mechanics,
exercise physiology and safety driving three principles.