What to do if KaVo Dental equipment display shows ID 33?
If the KaVo dental equipment displays 'ID 33', it means that there is no CAN node or internal communication is faulty. Call a service technician.
What does it mean when the "HYDROclean" button (red) flashes on KaVo ESTETICA E50 Life?
If the LED on the 'HYDROclean' button flashes red on your KaVo dental equipment, there is a malfunction in the amalgam separator. Call a service technician.
Why is the spray insufficient in my KaVo Dental equipment instruments?
If the spray at the instruments of your KaVo dental equipment is insufficient, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the instrument operating instructions.
Why an acoustic signal is issued every second on KaVo Dental equipment?
If you hear an acoustic signal every second on your KaVo dental equipment, the leaking water switch is recognizing leaking water. Remove water from the unit body. If necessary, have a technician fix the leak.
Why there is no heating function on the multifunctional handpiece of KaVo Dental equipment?
If there's no heating function on the multifunctional handpiece of your KaVo dental equipment, ensure that spray heating is preselected.
What to do if my KaVo Dental equipment camera freezes even after reinserting it?
If your KaVo dental equipment camera freezes even after taking it out and reinserting it, the issue might be electrical or electromagnetic interference from other equipment. Restart the software.
What does ID 72 mean on my KaVo Dental equipment display?
If your KaVo dental equipment display shows 'ID 72', insert the DEKAPURE bottle.
What to do if the spray at the instruments is insufficient on KaVo Dental equipment?
If you are getting an insufficient spray at the instruments of your KaVo dental equipment, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the accompanying instrument operating instructions.
What to do if KaVo Dental equipment display shows System State?
If the KaVo dental equipment display shows 'System State', the unit does not work. Call a service technician.
How to fix KaVo ESTETICA E50 Life when nothing works?
If your KaVo dental equipment isn't working, first check if the main switch is turned on. If it is, the main service fuse might have interrupted the circuit. Unplug the unit, then check and replace the fuse located next to the master switch. Use a screwdriver to open the bayonet closure. Replace the fine-wire fuse with the correct type: T 6,3 H (Mat. no. 0.223.2783) for 220-240 V AC, or T 10 H (Mat. no. 1.007.2529) for 100-130 V AC. Re-close the bayonet closure.
General| Type | Dental treatment unit |
|---|---|
| Model | ESTETICA E50 Life |
| Manufacturer | KaVo |
| Integrated endodontics functions | Yes |
| Integrated surgical functions | Yes |
| Cuspidor | Integrated |
| Control Panel | Touchscreen control panel |
| Air/Water Syringe | Integrated |
| Power Supply | 230 V, 50/60 Hz |
| Operating light | LED operating light |
| Multimedia integration | Optional |
| Hygiene system | Integrated |
| Chair Positions | Multiple programmable positions |
| Lighting | LED operating light |
| Spittoon | Integrated |
| Foot Control | Foot control available |
| Air Supply | 500 - 800 kPa (5 - 8 bar) |
| Water Supply | 200 - 500 kPa (2 - 5 bar) |
To Next Page
