Why is the spray insufficient in my KaVo Dental equipment instruments?
If the spray at the instruments of your KaVo dental equipment is insufficient, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the instrument operating instructions.
What to do if the spray at the instruments is insufficient on KaVo Dental equipment?
If you are getting an insufficient spray at the instruments of your KaVo dental equipment, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the accompanying instrument operating instructions.
Why is my KaVo Dental equipment making a melody sound?
If your KaVo dental equipment is emitting a melody, it could mean that the amalgam separator CAS1 is almost full (95%). Exchange the amalgam container.
What causes leaks in KaVo ESTETICA E50 Life Dental equipment instruments?
Leaks in your KaVo dental equipment instruments can be caused by damaged O-rings at the MULTIflex or motor coupling, gripping sleeve, or cannula of the triple-function handpiece. Replace the O-rings.
What to do if KaVo Dental equipment display shows ID 74?
If the KaVo dental equipment displays 'ID 74', and the indicator shows that the DEKASEPTOL bottle is not full after 600 seconds (10 minutes), it means that Centramat is empty. Notify a service technician.
Why there is no heating function on the multifunctional handpiece of KaVo Dental equipment?
If there's no heating function on the multifunctional handpiece of your KaVo dental equipment, ensure that spray heating is preselected.
What to do if KaVo Dental equipment display shows ID 66?
If your KaVo dental equipment displays 'ID 66', there is an amalgam separator malfunction. You should fix the malfunction, referring to the Instructions for Use of the amalgam separator for guidance.
What does ID XX mean on my KaVo ESTETICA E50 Life display?
If your KaVo dental equipment display shows 'ID XX', call a technician.
Why is there no cold light on my KaVo ESTETICA E50 Life Dental equipment multifunctional handpiece?
If there is no cold light on your KaVo dental equipment multifunctional handpiece, the heating function may be preselected. Preselect cold light instead.
Why is the LED on the "LP/AP" button flickering on my KaVo Dental equipment assistant unit?
If the LED on the "LP/AP" button is flickering on your KaVo dental equipment assistant unit, the data connection to the foot control is faulty. Turn the wireless foot control on. If the problem continues, call a service technician.
General| Type | Dental treatment unit |
|---|---|
| Model | ESTETICA E50 Life |
| Manufacturer | KaVo |
| Integrated endodontics functions | Yes |
| Integrated surgical functions | Yes |
| Cuspidor | Integrated |
| Control Panel | Touchscreen control panel |
| Air/Water Syringe | Integrated |
| Power Supply | 230 V, 50/60 Hz |
| Operating light | LED operating light |
| Multimedia integration | Optional |
| Hygiene system | Integrated |
| Chair Positions | Multiple programmable positions |
| Lighting | LED operating light |
| Spittoon | Integrated |
| Foot Control | Foot control available |
| Air Supply | 500 - 800 kPa (5 - 8 bar) |
| Water Supply | 200 - 500 kPa (2 - 5 bar) |
To Next Page
