What to do if my KaVo Dental equipment patient chair does not move?
If the patient chair does not move, check if the safety shutoff is activated (indicated by a flashing LED on the control panel). Eliminate the reason for the shutoff.
Why are components descending with spring arms on my KaVo ESTETICA E50 Life?
If components are descending with spring arms on your KaVo dental equipment, the gas spring is defective. Call a service technician.
What does ID 69 mean on my KaVo Dental equipment?
If your KaVo dental equipment display shows 'ID 69', intensive germ reduction must be done. Carry out an intensive germ reduction cleaning.
What does ID 68 mean on my KaVo ESTETICA E50 Life Dental equipment display?
If your KaVo dental equipment display shows 'ID 68', a service is required. Call a technician.
What does ID 67 mean on my KaVo ESTETICA E50 Life Dental equipment display?
If your KaVo dental equipment display shows 'ID 67', the oxygenal container is empty. Refill the Oxygenal container.
What does ID 66 mean on my KaVo ESTETICA E50 Life Dental equipment?
If your KaVo dental equipment display shows 'ID 66', it indicates an amalgam separator malfunction. Remedy the malfunction.
What does ID 33 mean on my KaVo ESTETICA E50 Life Dental equipment display?
If your KaVo dental equipment display shows 'ID 33', there is no CAN node and/or internal communication is faulty. Call a service technician.
Why does my KaVo Dental equipment camera freeze and the monitor turns off?
If the camera image on your KaVo dental equipment freezes and the monitor turns off, this might be due to electrical or electromagnetic interference from other equipment. Restart the treatment unit and the CONEXIO PC.
What to do if my KaVo Dental equipment camera freezes even after reinserting it?
If your KaVo dental equipment camera freezes even after taking it out and reinserting it, the issue might be electrical or electromagnetic interference from other equipment. Restart the software.
Why does my KaVo ESTETICA E50 Life Dental equipment camera freeze without pressing any buttons?
If the camera image on your KaVo dental equipment freezes without the release button or foot control being triggered, it may be due to electrical or electromagnetic interference from other equipment. Replace the camera in the holder and then take it out again.
General| Type | Dental treatment unit |
|---|---|
| Model | ESTETICA E50 Life |
| Manufacturer | KaVo |
| Integrated endodontics functions | Yes |
| Integrated surgical functions | Yes |
| Cuspidor | Integrated |
| Control Panel | Touchscreen control panel |
| Air/Water Syringe | Integrated |
| Power Supply | 230 V, 50/60 Hz |
| Operating light | LED operating light |
| Multimedia integration | Optional |
| Hygiene system | Integrated |
| Chair Positions | Multiple programmable positions |
| Lighting | LED operating light |
| Spittoon | Integrated |
| Foot Control | Foot control available |
| Air Supply | 500 - 800 kPa (5 - 8 bar) |
| Water Supply | 200 - 500 kPa (2 - 5 bar) |
To Next Page
