KaVo ELECTROtorque 4890

Need help?

Do you have a question about the KaVo ELECTROtorque 4890 and is the answer not in the manual?

Summary

Introduction and Safety

Pictogram Meanings

Explains warning and information symbols used in the manual.

General Operating Information

Provides general guidance, operating modes, and responsibilities for the unit's use.

Safety Measures

Details essential safety precautions and guidelines for operating the unit.

Cardiac Pacemaker Precautions

Discusses precautions when treating patients with cardiac pacemakers.

Product Information and Setup

Scope of Delivery

Lists the components included in the ELECTROtorque 4890 package.

Purpose and Applications

Describes the intended use of the ELECTROtorque 4890 dental unit.

Cleaning and Care

Provides instructions for cleaning and maintaining the unit's surfaces and components.

Disinfecting the Unit

Outlines procedures and guidelines for disinfecting the unit.

Technical Specifications

Presents detailed technical specifications for the unit, transformer, and motor.

Unit Placement and Mounting

Illustrates and describes the recommended mounting positions for the unit.

Installation and Connection

Guides on how to install the ELECTROtorque 4890 and connect it to the dentist unit and transformer.

Voltage Adaptation

Explains how to adapt the transformer's voltage settings.

Connection Requirements

Specifies the necessary air quality and pressure requirements for proper operation.

Preparation for Commissioning

Details steps for preparing the unit before initial operation.

Foot Control Calibration

Details the procedure for calibrating the foot control pedal for accurate pressure sensing.

Motor Start Pressure Setting

Specifies the prefixed pressure value required to start the motor.

Lamp Voltage Adjustment

Describes how to adjust the voltage for the unit's lamp.

Operation, Maintenance, and Troubleshooting

Controls and Functional Parts

Identifies and explains the various controls and functional components of the ELECTROtorque 4890.

Unit Operation Instructions

Provides instructions on how to operate the ELECTROtorque 4890 unit.

Unit Maintenance Procedures

Outlines procedures for maintaining and servicing the ELECTROtorque 4890 unit.

Troubleshooting Guide

Lists common error messages and their potential causes and remedies.

Support and Logistics

Transport and Storage Guidelines

Gives guidelines for the proper transport and storage of the unit and its packaging.

Handling Transport Damage

Instructs users on how to handle and report damages incurred during transport.

Packaging Details

Specifies the packaging dimensions and weight for the ELECTROtorque 4890.

Warranty Terms and Conditions

Details the warranty terms and conditions for the ELECTROtorque 4890 unit.