22
ELECTROtorque 4890/K200.
A 9 Maintenance
The following are authorized to
repair and service the KaVo
ELECTROtorque:
• the engineers of KaVo agents through-
out the world
• the engineers of authorised KaVo dealers
who have been specially trained by KaVo
• independent engineers specially trained
by KaVo.
• Before opening housing parts, pull out
the mains plug or completely isolate
from the mains connection and thus cut
off all power to the unit.
In the event of soiling, use a damp cloth to
rub or wipe the outside of the ELECTRO-
torque 4890 with tube 1.
When cleaning, protect the
ELECTROtorque 4890 from
penetration with water.
Maintenance and care of the motor
INTRA LUX K 200 to be carried out
according to the instructions 1.001.1049
supplied with the motor.
To Next Page
Loading...
