11
ELECTROtorque 4890/K200.
A 3.2 Transformer
Technical data
Transformer 1.001.8749
Dimensions and weights
Width: 4 inches
Depth: 6 inches
Height: 3 inches
Weight: ca. 1400 gramms
Ambient conditions:
Permitted indors
Permitted ambient temperature range of
41°F - 104°F (5°C - 40°C)
Permitted relative humidity up to max. 80%
degree of soiling: 2
overvoltage category II
protection class: II
protection art: IP 40
Mains voltage - mains frequency
Electrical connection
• The transformer design must comply
with the national regulations and
requirements for medical equipment.
• The ELECTROtorque 4890 is
finally for the operation with the
transformer type 4880 certified.
Check that the local mains voltage and
mains frequency conincide with the
specifications on the rating plate and the
fuse holder. Adapt if required (see
A 5.2 Voltage adaptation 1.001.8749).
Rated power:
Input power of unit max. 150 VA
Transformer output
no load value max. 33 V DC
Disconnection:
Use mains plug as disconnection.
To Next Page
Loading...
