4140
8.0 Technical Description
8.1 Basic Technical Specifications
Maximum deviation from fixed factors: ±5% (unless otherwise noted)
Total weight: 2.7kg
Environmental
Operation
Temperature 50°F (+10°C) to 104°F (+40°C)
Relative humidity 30% to 80%, non-condensing
Storage and transportation
Temperature -4°F (-20°C) to 122°F (+50°C)
Relative humidity
<90%, non-condensing
Do not use the KaVo NOMAD PRO 2 outside of the temperature and relative humidity
ranges specified.
Classification / Specification Compliance
Conforms to AAMI ES60601-1, IEC
STDS. 60601-3, 60601-6, 62366,
60601-2-65
Complies with FDA radiation
performance standards 21CFR,
Subchapter J Internally Powered, Type BF
MDD (93/42/EEC): Annex IX Class IIb
IPX specification IPX0; do not operate under wet conditions
Mode of operation Intermittent operation
Applied part (non-detachable) Collimator Cap
Electrical
Rechargeable lithium batteries 21.6V nominal; 24.6V maximum, 1.7A/hr
Battery current at 2.5mA, 60kVp output 12.5A
X-ray Controls and Generator
Exposure time range 0.02–1.00 sec. (in 0.01 second increments)
Maximum duty cycle 1:60 (one 1 second exposure every 60 seconds)
Minimum permanent filtration ≥1.5mm Al (0.8mm glass, 0.5mm Al, 0.2mm
plastic cap)
Output power 150W nominal at 60kV, 2.5mA
Generator rating 2.5mA (±5%) at 60kVp (±10%)
To Next Page
Loading...
