KEB ACOMBIVERT F5 X3A Reference Manual

The programming menu is where all manual parameter adjustments are
made and can be accessed at Home > Prog (F3).
The Parameter menu contains the following groups:
• Operator System (OS)
• Basic Setup (US)
• Inputs (LI)
• Motor Data (LM)
• Encoder Data (LE)
• Machine Data (LN)
• Speed Prole (LS)
• Tune Parameters (LL)
• Control Setting (LC)
• Timer Parameters (LT)
• Positioning Parameters (LP)
• Special Functions (LX)
• Conguration Handling (CH)
• Analog I/O (LA)
• Outputs (LO)
• Diagnostic Parameters (DG)
• Field Bus Conguration (FB)
• Terminal Slowdown (TS)
• Debug Parameter Group (DB)
Complete parameter descriptions are listed in Section 6.
Not all parameters may be viewable and changeable, depending
on the password accessibility. Refer to Section 4.8.2 for additional
information on password access.
4.7 Programming
Menu
i
79
LCD Keypad

KEB ACOMBIVERT F5 X3A Specifications

General

Brand	KEB
Model	ACOMBIVERT F5 X3A
Category	DC Drives
Language	English