To Next Page

To Previous Page

Parameter Description

2. Parameter Description

On delivery the KEB COMBIVERT G6 is assigned with an user menu, the customer parame-

ters (CP-Parameters). These represent a selection of important parameters for the operation.

Up to a maximum of 48 customer parameters can be dened from over 500 parameters.

Only parameter CP00 password input is predened and can not be modied or deleted.

The customer parameter menu described in this manual is valid for open-loop systems. That

can be indentied by parameter CP48 (see below).

2.1 Selection of the customer parameter menu

CP48 Software version

Co-domain Setting Description

0.0.0.0 … F.F.F.F – Display of the software version

The rst two digits display the major and minor version number (e.g.

1.2.x.x => V1.2)

The third digit displays the power unit software

x.x.0.x Power unit open-loop 1st Version (this manual)

x.x.1.x Power unit open-loop 2nd Version (this manual)

x.x.2.x Power unit ASCL → available as Download.

x.x.3.x Power unit SCL → available as Download.

The fourth digit displays a serial number for the date code.

KEB COMBIVERT G6 Manual

Other manuals for KEB COMBIVERT G6