KEB COMBIVERT R5-C User Manual

GB - 5
Preface
Preface
1.1 General
First we would like to welcome you as a customer of the company KEB Automation KG
and congratulation to the purchase of this product. You have decided for a product on
highest technical level.
The described hard- and software are developments of the KEB Automation KG. The
enclosed documents correspond to conditions valid at printing. Misprint, mistakes and
technical changes reserved.
The instruction manual must be made available to the user. Before working with the
unit the user must become familiar with it. This especially applies to the knowledge and
observance of the following safety and warning indications. The pictographs used in this
instruction manual have following meaning:
Danger
Is used, if life or health of the user is in danger or if sub-
stantial damage to property can occur.
Warning
Caution
Attention
Is used, if a measure is necessary for safe and trouble-
free operation.
observe at
all costs
Information
Is used, if a measure simplies the handling or operation
of the unit.
Aid
Tip
Non-observance of the safety instructions leads to the loss of any liability claims. This
list is not exhaustive.
1.2 Safety instructions
Observe safety and
operating instruc-
tions
Precondition for all further steps is the knowledge and
observance of the safety and operating instructions.
This is provided accompanied by the device or by the
download site of www.keb.de.
Non-observance of the safety and operating instructions leads to the loss of any liability
claims. The warnings and safety instructions in this manual work only supplementary.
This list is not exhaustive.
1.3 Validity and liability
The use of our units in the target products is outside of our control and therefore
lies exclusively in the area of responsibility of the machine manufacturer.
The information contained in the technical documentation, as well as any user-specic
advice in spoken and written and through tests, are made to best of our knowledge and
information about the application. However, they are considered for information only
without responsibility. This also applies to any violation of industrial property rights of a
third-party.
Selection of our units in view of their suitability for the intended use must be done gene-
rally by the user.
Tests can only be done within the application by the machine manufacturer. They must
be repeated, even if only parts of hardware, software or the unit adjustment are modied.

KEB COMBIVERT R5-C Specifications

General

Brand	KEB
Model	COMBIVERT R5-C
Category	Power Supply
Language	English