KEB COMBIVERT S6 Series

64
CONNECTION OF THE POWER UNIT
4.2.7.3 Use of non-intrinsically safe braking resistors
WARNING
Use of non-intrinsically safe braking resistors
Fire or smoke development in case of overload or fault !
► Only use braking resistors with temperature sensor.
► Evaluate temperature sensor.
► Trigger fault on the drive controller (e.g. external input).
► Switcho󰀨inputvoltage(e.g.inputcontactor).
► Connection examples for non-intrinsically safe braking resistors
=> Instructions for use „Installation Braking Resistors“.
Instructions for use „Installation Braking Resistors“
www.keb.de/fileadmin/media/Manuals/dr/ma_dr_braking-resis-
tors-20116737_en.pdf