73
CE-MARKING
5 Certication
5.1 CE-Marking
CE marked drive controllers have been developed and manufactured to comply with the
regulations of the Low-Voltage Directive and EMC directive.The harmonized standards
of the series EN 61800-5-1 and EN 61800-3 were used.
Further information can be found in the download area of www.keb.de under
the search term „Declaration of conformity“.
5.2 Functional safety
Drive controllers with functional safety are marked with the FS logo on the nameplate.
These devices are designed and manufactured in accordance with the Machine Direc-
tive. The harmonized standard of the series EN 61800-5-2 is used.
5.3 Annex to the declaration of conformity
Annex to the EC declaration of conformity for systems with functional safety:
Product designation: Drive controller - series xxS6xxx-xxxx
Dimension 07 - 14
Voltage class 200 V / 400 V
Herebywedeclarethatthesafetycomponentspeciedabovecomplieswithallrelevant
regulations of the machine directive.
Thesafetycomponentspeciedabovemeetstherequirementsofthefollowingguide-
lines and standards:
• Machine directive 2006/42/EC
• EMC directive 2014/30/EU
• Low-Voltage Directive 2014/35/EU
• Hazardous substances 2011/65/EU
To Next Page
Loading...
Need help?
General
