Need help?Do you have a question about the KEB COMBIVERT F6 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Series | COMBIVERT F6 |
| Type | Frequency inverter |
| Output Voltage | 0 to Input Voltage |
| Output Frequency | 0 to 400 Hz |
| Frequency Range | 0 to 400 Hz |
| Control Method | V/f control |
| Communication Interfaces | CANopen, PROFIBUS |
| Protection Class | IP20 |
| Cooling | Natural cooling |
| Safety | Safe Torque Off (STO) according to EN 61800-5-2 |
| Application | General industry, pumps, fans, conveyor systems |
| Protection Features | Overcurrent, overvoltage, undervoltage, overheating |
| Ambient Temperature | -10°C to +40°C |
| Enclosure Rating | IP20 |
Explains safety signal words and symbols used in the documentation.
Details the procedures and safety measures for electrical connections.
Outlines procedures and safety precautions for starting and operating the unit.
Lists the key characteristics and functionalities of the COMBIVERT F5/F6 series.
Provides technical data for drive converters in the 400V class.
Provides technical data for drive converters in the 690V class.
Details the physical dimensions and weights of the units.
Guidelines for installing the unit within a control cabinet.
Information on the air and liquid cooling systems for the COMBIVERT.
Details the connection terminals on the power unit.
General instructions and precautions for connecting the motor.
Illustrates mains and motor connection diagrams for unit sizes 32-35.
Illustrates mains and motor connection diagrams for unit sizes 36-39.
Illustrates the overload characteristic curve of the drive converter.
Shows power dissipation for 400V class at rated operation by switching frequency.
To Next Page
