KEB COMBIVERT S6 Series User Manual

8
TABLE OF CONTENTS
5 Certication .................................................................. 73
5.1 CE-Marking .....................................................................................................................................73
5.2 Functional safety ...........................................................................................................................73
5.3 Annex to the declaration of conformity .......................................................................................73
5.4 UL Marking ..................................................................................................................................... 75
5.5 Further informations and documentation ................................................................................... 78
6 Revision History .......................................................... 79

KEB COMBIVERT S6 Series Specifications

General

Category	Controller
Output Frequency	0-400 Hz
Protection Class	IP20
Enclosure Rating	IP20
Series	COMBIVERT S6
Output Voltage	0-480V AC
Power Range	0.37-250kW
Control Method	V/f control, Vector control
Communication Interfaces	CANopen, Profibus
Safety	Safe Torque Off (STO)
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature
Operating Temperature	-10 to +40 °C
Ambient Temperature	-10 to +40 °C
Storage Temperature	-25 to +70 °C
Humidity	5% to 95% non-condensing

Summary

Basic Safety Instructions

Transport, Storage, and Proper Use

Installation Safety

Safety precautions and guidelines for installing the device.

Electrical Connection Safety

Safety warnings and procedures for electrical connections.

EMC-Compatible Installation

Voltage and Insulation Testing

Start-up and Operation Safety

Safety instructions for initial start-up and operation.

Operation Precautions

Product Description

Specified Application

Residual Risks and Unintended Use

Product Features

Technical Data

3.1 Operating Conditions

Device Data of the 400 V Devices

3.4.1 Overview of the 400 V Devices

Presents general technical data for 400V devices.

3.4.2 Rated Operation

Defines conditions for rated operation of 400V devices.

3.4.3 Voltage and Frequency Specifications of the 400 V Devices

Details input/output voltage and frequency specs for 400V devices.

3.4.4 Input and Output Currents / Overload of the 400 V Devices

Lists input/output currents and overload capabilities.

Device Data of the 230 V Devices

3.5.1 Overview of the 230 V Devices

Presents general technical data for 230V devices.

3.5.2 Rated Operation

Defines conditions for rated operation of 230V devices.

3.5.3 Voltage and Frequency Specifications of the 230 V Devices

Details input/output voltage and frequency specs for 230V devices.

3.5.4 Input and Output Currents / Overload of the 230 V Devices

Lists input/output currents and overload capabilities.

General Data

3.6.1 Overload Characteristic (OL)

Explains the overload behavior and protection.

3.6.1.1 Switch-off Time Depending on Overload at 400V Devices

Graph showing switch-off time vs. overload for 400V devices.

3.6.1.2 Switch-off Time Depending on Overload at 230 V Devices

Graph showing switch-off time vs. overload for 230V devices.

3.6.1.3 Maximum Current (OL2)

Details maximum current limits and overload characteristic (OL2).

Frequency-Dependent Maximum Current 400 V Devices

Table of max currents for 400V devices at different frequencies.

Frequency-Dependent Maximum Current 230 V Devices

Table of max currents for 230V devices at different frequencies.

3.6.2 Switching Frequency and Temperature

3.6.3 Protection of the Drive Controller

Specifies fuses and protection switches.

3.6.4 DC Link / Braking Transistor Function

3.6.5 Power Dissipation 400 V Devices

3.6.6 Power Dissipation 230 V Devices

Installation and Connection

4.2 Connection of the Power Unit

Details connection procedures for power unit components.

4.2.1 Connection of the Voltage Supply

Shows circuit diagrams for voltage supply connections.

4.2.1.3 Mains Terminal Block X1A

Details the mains terminal block connections and cross-sections.

4.2.3 Protective Earth and Functional Earth

4.2.4 AC Connection

Explains AC supply connection for 3-phase and 1-phase devices.

4.2.5 DC Connection

Details DC connection procedures and terminal blocks.

4.2.6 Connection of the Motor

Instructions for selecting, connecting, and wiring the motor cable.

4.2.7 Connection of a Braking Resistor

Brake Control and Temperature Detection for K- and A- Control

4.3.1 Specification and Connection of the Brake Control

4.3.2 Specification and Connection of the Temperature Detection

4.3.4 Connection of a KTY Sensor

4.3.5 Connection of PTC, Temperature Switch or PT1000

Brake Control and Temperature Detection for P- Control

4.4.1 Specification and Connection of the Brake / Relay Control

4.4.2 Specification and Connection of the Temperature Detection

4.4.2.2 Connection of a KTY Sensor

4.4.2.3 Connection of PTC, Temperature Switch or PT1000

Certification

5.1 CE-Marking

5.2 Functional Safety

UL Marking

UL Market Compliance Instructions

Branch Circuit Protection for Series S6 Housing Size 2