To Next PageTo Next Page
Need help?Do you have a question about the KEER ECLIPSE MAX and is the answer not in the manual?
Provides an overview of the manual's purpose and scope.
Instructions for maintaining furnace air filters for optimal performance.
Outlines annual servicing and cleaning procedures for the furnace.
Crucial safety precautions and prohibitions to prevent hazards.
Homeowner's responsibility for keeping the vent terminal clear.
Step-by-step guide for safely powering off the furnace.
Procedure for safely resuming furnace operation after shutdown.
Key information and considerations for a successful installation.
Critical safety advisories to prevent damage or injury during installation.
Requirements for complying with relevant building and safety codes.
Details on how to orient the furnace breech for installation.
Guidelines for furnace location and proper vent system connection.
Requirements for adequate air supply for furnace operation.
Instructions for setting and maintaining proper draft pressure.
Safety and compliance guidelines for furnace wiring.
Specifies safe distances from combustible materials.
Recommendations for optimal furnace placement within the installation space.
Step-by-step guide for installing the sensor.
Procedures for putting together and installing the furnace burner.
Instructions on how to replace the burner nozzle.
Steps to adjust the burner for optimal fuel efficiency.
How to set blower speeds for the Classic Air model.
Considerations for installing an air conditioning coil with the furnace.
Precautions for installing a humidifier to avoid warranty issues.
Guidance on setting thermostat anticipator values.
Details on installing a safety switch for vented systems.
Explains the fan's operation limits and modes.
Describes how the blower operates when the furnace is not actively heating.
Details the control logic for the MAX model's blower system.
Safe distances required from flammable materials.
Specifies the correct depth for burner installation.
Technical data related to air flow and blower performance.
Physical measurements of the furnace unit.
Explains diagnostic codes indicated by LEDs on MAX/EVO models.
General