84
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
6. Can I change the Primary Speaker as the left channel?
• By default, the Primary Speaker is the right channel and the Secondary speaker is
the left channel. After connecting the speakers to your home Wi-Fi network, you can
inverse the L/R channels in the KEF Connect App.
7. Do I need to pair the two speakers?
• No, the two speakers are already paired at the factory. If you do not hear any sound
from the Secondary Speaker, see chapter “Troubleshooting”.
8. What is the purpose of the ethernet cable in the packaging box?
• Use this inter-speaker cable to connect the Primary Speaker and Secondary Speaker
if you prefer a higher sound reolution (96 kHz/24 bit), or if the wireless connection
between the speakers is not stable. After connecting the inter-speaker cable, you must
also enable Cable Mode in the KEF Connect App.
9. Can I rename the speaker?
• Yes, renaming can be done in the KEF Connect App. This will change the name for
both Wi-Fi and Bluetooth connections.
To Next Page
Loading...
