AMPLIFIERS
LSX contains four amplifiers, 2 in each cabinet, in a Dual-Mono Bi-
Amp configuration.
One 70W Class D amplifier in each cabinet powers the bass and
mid-range frequencies.
One 30W Class D amplifier in each cabinet powers the high-
frequencies.
Total system power is 200W (100WPC RMS)
MUSIC INTEGRITY ENGINE™ & DSP
KEF’s bespoke DSP (Digital Signal Processor), the Music Integrity
Engine™ is designed specifically for the LSX driver and cabinet,
allowing LSX to reproduce audio as cleanly and purely as is
expected from the LS family of products.
Each cabinet contains its own on-board DSP for precise
reproduction and control of the audio output. A precise on-board
clock controls the timing between the left and right channels,
whether in Cable Mode or when using KEF’s proprietary on-board
Wi-Fi network for complete wireless operation.
Each cabinet also contains the same audiophile-quality DAC as
found in the LS50 Wireless.
Consult the section on the KEF Control and Audio Profiles for
information on getting the highest quality audio output possible
through use of the DSP and Music Integrity Engine. (pg 19)
WAYS TO CONNECT
LSX easily connects to your music players, storage devices and
streaming platforms. For complete information on each connection
method please consult the corresponding section for each.
Here is a quick list of all the ways to connect your LSX:
Wi-Fi and Ethernet
Spotify Connect
Spotify Premium required
Bluetooth
TOSLINK Optical
Analog AUX
To Next Page
Loading...
Need help?
General
