17
9 – Optical
INDICATOR
Select the OPT input from the KEF Connect app homepage.
LSX supports connection to 96kHz/24-bit digital
sources. Optical digital sources include televisions,
DVD players, CD players, etc. Connection is made
via a standard TOSLINK cable (not included).
For use with a television, DVD, or streaming service such
as Netflix, Hulu, etc.) the audio stream from the source
device must be set to PCM (two-channel stereo mode).
Latency via the optical input is extremely low and should
not be noticeable, even in wireless mode.
CONNECTING A USB DEVICE TO LSX
If you would like to connect a USB audio device such as a PC or
laptop to LSX, use a commercially available USB-to-Optical
converter (not included) and select the Optical input as described
above.
10 – AUX & Analog Inputs
INDICATOR
Select the AUX input from the KEF Connect app homepage.
LSX supports standard 3.5mm stereo input jacks
for connection to your analog devices
(turntables, tape decks, Smartphone headphone
outputs).
There are a variety of connection adapters available for
connecting the 3.5mm stereo cable to standard RCA-type
pin jacks. The cable converter shown below is necessary
for connecting LSX to a standard
turntable phono connection, analog
tape deck, or other similar device.
For use with a turntable you may need to install a phono-
stage pre-amp between LSX and the device.
To Next Page
Loading...
