7
• The LSX will now reboot. The app will indicate when the
speakers have rebooted and when they have connected to
your network.
• Once connection is successfully completed, the app will
advance to the next screen. Press LET’S START.
INDICATOR
The indicator on the Master speaker will now be lit
solid white, indicating your speakers are in Wi-Fi
mode.
On-Screen Instructions
The KEF Control App will now guide you through a short tutorial
on app operation.
To play music press OPEN KEF STREAM.
If there are any available firmware updates for your LSX
the app will prompt you to update your system.
In order to keep your LSX running with the latest firmware, please
be sure to update your speakers when prompted. For instructions
on updating your firmware please see page 24.
YOU ARE NOW READY TO LISTEN!
Once you have successfully connected your LSX to your local
network and the KEF Control and Stream apps, you are now able
to set sound profiles for your various listening sources. Please see
page 19 for further information.
REMOTE CONTROL
The included Remote Control performs the following functions:
• Power On/Off
• Input Select
• Volume +/-
• Mute
• Pause/Play
• Skip Track
When using streaming services such as Spotify Connect or
Tidal, or devices such as CD players, the Pause/Play and
Skip Track functions will not be operable from the LSX
remote.
The Remote Control range is approximately 30° on either side of
the Master speaker indicator. With fresh batteries the Remote
Control range is approximately 20 feet (6m).
The battery is a standard lithium disk battery catalog number
CR2032. To avoid damage to the remote, please replace with the
same type and number.
Using A Universal Remote Control
KEF remote codes have been published to the major Universal
Remote Control manufacturers.
Please see Appendix C for a list of remote codes.
To Next Page
Loading...
Need help?
General
