16
MU-MIMO
Multi-user - multiple input/multiple output. MIMO is a wireless
communication technology that allows a set of users or wireless
terminals, each with one or more antennas, to communicate with
each other on a network.
When on-boarding your speakers, be sure to connect
them to the same network as your device (phone, tablet,
etc.).
2.4GHz band: To avoid cross-interference and channel
contention issues avoid using Channel 1. Check your
routers operation manual for information on how to
select channels.
2.4GHz band: All channels are available but for optimal
performance channels 6 and 11 are recommended.
In crowded network environments it is advisable to use
the Ethernet connection from your router to avoid
network failures such as drop-outs during streaming.
There are apps available that allow you to check which
channels are available and what your network signal
strength is. These may help you set up the best possible
streaming environment for your LSX.
8 – Bluetooth
INDICATOR
LSX features Qualcomm’s aptX codec for near-CD quality
wireless streaming from an aptX compatible device. If the source
device is not aptX compatible the higher compression of Bluetooth
4.0 will be transmitted and decoded.
CONNECT TO BLUETOOTH
Select the Bluetooth icon from the KEF
Connect App homepage. LSX will enter
pairing mode.
For first time connection you
may have to enter your device’s
Bluetooth menu and select LSX.
In the event you encounter a problem
pairing your device to LSX, there is a
Bluetooth Pairing button on the rear of the Master speaker.
The BT PAIRING indicator blinks during search mode. Press and
hold the BT PAIRING button until the indicator stops blinking,
which indicates a device has been paired to LSX.
To Next Page
Loading...
Need help?
General
