QuNeo ediTor
14
QuNeo
ChapTer 2 - QuNeo ediTor sofTWare
The QuNeo Editor software allows you to create customized Presets and load them onto QuNeo. This chapter will
guide you through everything you need to know to install and operate the QuNeo Editor software.
2.1 sysTeM reQuireMeNTs
We recommend the following minimum system requirements for the QuNeo Editor:
MAC:
• An Intel Core 2 Duo 2.3GHz or greater
• Mac OS 10.5 or later
• 100 MB free hard disk space
WINDOWS:
• Windows XP, or Windows 7
• Intel Core 2 processor or greater
• 1GB of RAM with 100 MB free hard disk space
2.2 iNsTalliNG The sofTWare
Download the QuNeo Editor Installer here: http://www.keithmcmillen.com/QuNeo/downloads/
NOTE: The download package includes both the Editor software and documentation.
Installer Instructions (Mac)
1. Double-click on the .dmg le to open the disk image.
2. Drag the QuNeo directory into the Applications Alias.
3. The QuNeo program folder will now appear in Applications.
Installer Instructions (Windows)
1. Extract the directory from the .zip le
2. Place the unzipped folder at a location of your choosing.
3. Do not move anything out of the directory. In order for the application to run it must be able to access
everything in the directory.
2.3 updaTiNG The firMWare
When the QuNeo Editor opens, it checks to make sure the rmware on the device is compatible with the
application. If the rmware is not compatible, an update prompt will appear. Click ok and wait until the blue
Mode button light stops ashing and the “Update Complete” dialog appears before continuing. The blue
light and progress bar on screen indicate that the rmware update is in progress.
An “Update Firmware” option is located in the le menu of the QuNeo Editor. Select this option and the
To Next Page
Loading...
Need help?
General