Keithley 2000 Quick Start Guide

1-34 Return to Section Topics 2000-903-01 Rev. C / October 2007
Section 1: Introduction Model 2000 Digital Multimeter Quick Start Guide
Status U0
U1
U2
U3
U4
U5
U6
Send machine status word
(199 format only)
Send error conditions (only
supports no scanner, IDDC,
IDDCO)
Send Translator word list
(since Translator is not
supported, replies with one
space character)
Send buffer size
Send current value of “V” (199
format, equivalent to U7 for
196)
Send input switch status (front
/rear) (199 format, equivalent
to U8 for 196)
Send simulated temperature
(set by H0)
Multiplex A0
A1
Auto/Cal multiplex disabled
Auto/Cal multiplex enabled
Delay Wn n=delay period in milliseconds,
(0msec to 999999msec)
Display Da
D
Display up to 12-character
message (a=character)
Cancel display mode
Table 1-16
Models 196/199 device-dependent command summary (cont.)
Mode Command Description

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD