1-6 Getting Started Model 6485 and 6487 User’s Manual
designed to be used with high performance test leads terminated with banana plugs, such
as the Model 8607 High Performance Banana Cables.
Model 8607 High Performance Banana Cables — Con
sists of two high voltage
(1000V) banana cables. The cables are terminated with banana plugs that have retractable
sheaths.
CAP-31 Protective Shield /Cap — Fo
r use with 3-lug triax connectors.
Model 6487 interlock cables and connector
Model 6517-ILC-3 Interlock Cable — Designed to connect the interlock of the Model 6487
to the Model 8009 test fixture.
Model 8002-ILC-3 Interlock Cable — Designed to
connect the lid interlock circuit of a
test fixture to the interlock circuit of the Model 6487.
CS-459 4-pin Female Interlock Connector —
Allows custom wiring of external circuits
to the Model 6487 interlock.
GPIB, RS-232, and trigger link cables and adapters
Models 7007-1 and 7007-2 shielded GPIB cables — Connects the Model 6485/6487 to
the GPIB bus using shielded cables and connectors to reduce electromagnetic interference
(EMI). Model 7007-1 is lm long; Model 7007-2 is 2m long.
Model 7009-5 shielded RS-232 cable —
Connects the Model 6485/6487 to the RS-232
interface using shielded cable and connectors to reduce electromagnetic interference
(EMI). Model 7009-5 is 5 ft. long.
Models 8501-1 and 8501-2 trigger link cables
— Connects the Model 6485/6487 to other
instruments with Trigger Link connectors (e.g., Model 7001 Switch System). Model 8501-
1 is lm long; Model 8501-2 is 2m long.
Model 8502 trigger link adapter —
Lets you connect any of the six trigger link lines of
the Model 6485/6487 to instruments that use the standard BNC trigger connectors.
Model 8503 DIN to BNC trigger cable —
Lets you connect trigger link lines one
(Voltmeter Complete) and two (External Trigger) of the Model 6485/6487 to instruments
that
use BNC trigger connectors. Model 8503 is lm long.
To Next Page
Loading...
Need help?
General
