Kemppi FastMig KM400 User Manual

• Protectthemachinefromsandanddustduringuseandinstorage.
• Therecommendedoperatingtemperaturerangeis-20to+40°C.Themachine’soperation
eciencydecreasesanditbecomesmorepronetodamageifusedintemperaturesin
excessof40°C.
• Placethemachinesothatitisnotexposedtohotsurfaces,sparksorspatter.
• Makesuretheairowtoandfromthemachineisunrestricted.
• EMCclassicationofthisproductisclassAinaccordancewithelectromagnetic
compatibility standards CISPR 11 and IEC 60974-10, and therefore the product is designed
to be used in industrial environment only. Such class-A equipment is not intended for use
in residential locations where the electrical power is provided by the public low-voltage
supply system. The machine may interfere with sensitive home electronic devices.
 WARNING:ThisclassAequipmentisnotintendedforuseinresidentiallocationswhere
the electrical power is provided by a public low-voltage supply system. In those locations
itmaybediculttoensuretheelectromagneticcompatibilityduetoconductedand
radiated disturbances.
• Arcweldingequipmentalwayscauseelectromagneticdisturbance.Tominimizethe
harmful eects of this, use the equipment strictly according to the operating manual and
other recommendations.
Gas cylinders and pneumatic devices
• Adheretotheinstructionsforhandlingpneumaticdevicesandgascylinders.
• Makesurethatgascylindersareusedandstoredinproperlyventilatedspaces.Aleaking
gascylincermayreplacetheoxygenintheinhaledair,causingsuocation.
• Beforeuse,makesurethatthegascylindercontainsgassuitablefortheintended
purpose.
• Alwaysxthegascylindersecurelyinanuprightposition,againstacylinderwallrackor
purpose-made cylinder cart.
• Nevermoveagascylinderwhentheowadjusterisinplace.Putthevalvecoverinplace
during transportation.
• Closethegascylindervalveafteruse.
Disclaimer
While every eort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specication of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
EN
5
FastMig KM 300, 400, 500 / © Kemppi Oy /0901
FI
SV
NO
DA
EN
DE
NL
FR
ES
PL
RU

Kemppi FastMig KM400 Specifications

General

Brand	Kemppi
Model	FastMig KM400
Category	Welding System
Language	English