3.
Finally secure the panel into place with the additional black plastic security clip provided. 3.
Ensure that the clip is positioned correctly. You will notice that the clip does not seat
snuggly if its positioned upside down.
WELDING SOFTWARE DELIVERY PROFILE4.
FastMig Pulse is designed to allow customer specied welding software choice. Following
delivery and installation your machine will include welding software specied at the point
of order. Detailed in the table below are typical welding curves available. If the delivery
specication is focused to a specic project and you wish to up-date the machine in future,
you can select additional welding software from the WISE & MATCH software menu. Order and
load these software products to your machine with Kemppi DataGun eld program device.
Wise and Match products provide optional welding application solutions. Wise and Match
products menu includes special weld process for (1) root pass and (2) thin plate welding, (3)
auto power regulation and (4) arc length recognition, (5) system lock function, plus additional
base material curves and optional panel function. With Wise & Match you can turn something
special into something unique.
1. WiseRoot
6265011
2. WiseThin
9991013
3. WisePenetration
9991000
4. WiseFusion
9991014
5. MatchLog
9991017
15
FastMig MXF65, 67 / © Kemppi Oy / 0920
To Next Page
Loading...
Need help?
General
