PF65 PANEL BUTTON FUNCTIONS5.
1. 3.
2.
4.
5. 6. 7. 8. 9.
10.
11.
ON / OFF BUTTON5.1
1.
Short Press: Panel returns to default display.
Long Press: When Welding panel (PF65) is ON => Welding panel is turned OFF. When Welding
panel (PF65) OFF => welding panel is turned ON and Setup Panel (P65) turns ON and selects
automatically that Welding Panel (WF#).
DYNAMICS BUTTON5.2
2.
Short Press: Dynamics setting if welding process is MIG/Synergic MIG. ArcForce setting if
welding process is MMA. Forming Pulse setting if welding process is Wise-Root/WiseThin.
Long Press: Wire Feeder number selection (WF#). If more than one Wire Feeder is connected to
system WF number selection must be made. Every Wire Feeer must be dierent WF number.
GAS TEST BUTTON5.3
3.
Gas Test function.
Pressing the button will show the gas test time. Gas test time can be adjusted by using the
pulse encoder.
Gas test will proceed after time adjustment is complete (short delay).
Gas test can be stopped by pressing any button.
17
FastMig MXF65, 67 / © Kemppi Oy / 0920
To Next Page
Loading...
Need help?
General
