Kenmore 385. 16633 - Page 71

Rolled hemming, picot edging and narrow hemming
(continued)
Picot edging
Stitch length :
Differenti!l feed ratio :
Needle :
Needle plate :
Thread
Needle :
Loopers :
Fabric :
3-4
1.0
1 (Right needle) x HA-1 SP No. 11
Rolled hemming needle plate.
(Marked "R" on reverse side.)
Long fiber polyester thread:
No 80 - 100
Synthetic: No. 60 - 100,
Silk: No. 50 - 100
Lightweight fabric such as organdy,
crepe de chine, lawn and georgette
Standard setting of tension dials
C) Needle thread tension (R) : 4
(_ Upper looper thread tension : 3
(_ Lower looper thread tension : 6
Correct thread tension
C) Needle thread
(_ Upper looper thread
(_) Lower looper thread
(_) Right side of fabric (Top side)
_) Wrong side of fabric (Reverse side)
'_'For better seam result
C) Fabric
Pull the fabric lightly to the back while sewibg
©
©
@
@
®
®
©
7O