Man-1112 Sigma XT+_23 Page 50 of 52
Extinguishant module 3
CONFIGURATION OPTION WRITE SETTING
Extinguishant output mode =
ACTIVATION MODE =
User O/p Mode =
FIRST ACTIV. ZONE =
LAST ACTV. ZONE =
RESET INHIBIT TIME =
PRE-REL. DELAY TIME =
EXTING. RELEASE TIME =
PULSED ACTIV. ALARMS ?
STEADY ACTIV. ALARMS ?
RELEASED IND. ON RELEASED INPUT ?
RELEASED IND. ON EXTING RELEASE ?
DELAY ON MANUAL RELEASE ?
NO DELAY ON MANUAL RELEASE ?
PRE-REL DELAY RESET ENABLED ?
PRE-REL DELAY RESET DISABLED ?
RELEASE TIMER ENABLED ?
RELEASE TIMER DISABLED ?
R0V NOT REMOVED ON SYSTEM RESET ?
R0V REMOVED ON SYSTEM RESET ?
EARTH FAULT ENABLED ?
EARHT FAULT DIASLABLED ?
FAULT OUTPUT ENABLED ?
FAULT OUTPUT DISABLED ?
LOW PRESS. I/P NORMAL ?
LOW PRESS. I/P INVERTED ?
EXTING. O/P 1 LEVEL =
EXTING O/P 2 LEVEL =
Extinguishant module 4
CONFIGURATION OPTION WRITE SETTING
Extinguishant output mode =
ACTIVATION MODE =
User O/p Mode =
FIRST ACTIV. ZONE =
LAST ACTV. ZONE =
RESET INHIBIT TIME =
PRE-REL. DELAY TIME =
EXTING. RELEASE TIME =
PULSED ACTIV. ALARMS ?
STEADY ACTIV. ALARMS ?
RELEASED IND. ON RELEASED INPUT ?
RELEASED IND. ON EXTING RELEASE ?
DELAY ON MANUAL RELEASE ?
NO DELAY ON MANUAL RELEASE ?
PRE-REL DELAY RESET ENABLED ?
PRE-REL DELAY RESET DISABLED ?
RELEASE TIMER ENABLED ?
RELEASE TIMER DISABLED ?
R0V NOT REMOVED ON SYSTEM RESET ?
R0V REMOVED ON SYSTEM RESET ?
EARTH FAULT ENABLED ?
EARHT FAULT DIASLABLED ?
FAULT OUTPUT ENABLED ?
FAULT OUTPUT DISABLED ?
LOW PRESS. I/P NORMAL ?
LOW PRESS. I/P INVERTED ?
EXTING. O/P 1 LEVEL =
EXTING O/P 2 LEVEL =
To Next Page
Loading...
