S
Shawn ByrdSep 13, 2025
What does “THUMBS N/A” mean on Kenwood Car Receiver?
- WwowensSep 13, 2025
The “THUMBS N/A” message on your Kenwood Car Receiver indicates that registration of thumbs up/thumbs down is not allowed.
To Next PageTo Next PageWhat does “THUMBS N/A” mean on Kenwood Car Receiver?
The “THUMBS N/A” message on your Kenwood Car Receiver indicates that registration of thumbs up/thumbs down is not allowed.
Why is radio reception poor on my Kenwood KDC-BT500U?
To improve poor radio reception on your Kenwood Car Receiver, ensure the antenna is firmly connected.
What to do if no Bluetooth device is detected on Kenwood Car Receiver?
If no Bluetooth device is detected by your Kenwood Car Receiver, try searching from the Bluetooth device again or reset the unit.
How to fix Bluetooth pairing issues on Kenwood KDC-BT500U?
If you are unable to pair a Bluetooth device with your Kenwood Car Receiver, ensure you've entered the same PIN code on both devices. If that doesn't work, delete the pairing information from both the unit and the Bluetooth device, and then try pairing again.
What does “NO DEVICE” mean on Kenwood KDC-BT500U Car Receiver?
The “NO DEVICE” message on your Kenwood Car Receiver indicates that you should connect a USB device and change the source to USB again.
What does “NO STATIONS” mean on Kenwood KDC-BT500U Car Receiver?
The “NO STATIONS” message on your Kenwood Car Receiver indicates that no stations are found.
What does “CHECK DEVICE” mean on Kenwood Car Receiver?
The “CHECK DEVICE” message on your Kenwood Car Receiver suggests checking the Pandora application on your device.
What does “NO SKIPS” mean on Kenwood KDC-BT500U Car Receiver?
The message “NO SKIPS” on your Kenwood Car Receiver indicates that the skip limit has been reached.
Why can't I control Bluetooth audio player on Kenwood Car Receiver?
If the connected Bluetooth audio player cannot be controlled with your Kenwood Car Receiver, verify that the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). Alternatively, disconnect and then reconnect the Bluetooth player.
What to do if the disc cannot be ejected from Kenwood Car Receiver?
If the disc cannot be ejected from your Kenwood Car Receiver, press and hold M to forcibly eject the disc, being careful not to drop it. If this doesn't work, reset the unit.
General| MP3 playback | Yes |
|---|---|
| CD-RW playback | - |
| Playback disc formats | CD audio |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| AM band range | 531 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 24 |
| DIN size | 1 DIN |
| RDS features | EON |
| Product color | Black |
| Volume control | Rotary |
| Frequency range | 20 - 20000 Hz |
| Disc types supported | CD, CD-DA |
| Audio output channels | 4.0 channels |
| Removable front panel | Removable |
| Equalizer bands quantity | 13 |
| Maximum power per channel | 50 W |
| Mobile operating systems supported | Android, iOS |
| Display type | LCD |
| Display digits | 13 digits |
| Illumination color | White |
| USB version | 2.0 |
| Bluetooth profiles | A2DP, AVRCP, HFP, PBAP, SPP |
| USB ports quantity | 1 |
| Bluetooth functions | Audiostreaming, Handsfree calling |
| Playback modes | Next, Previous, Random, Repeat |
| Pre-out channels | 2 SW |
| File format system | FAT 12/16/32 |
| Power requirements | 14.4 V DC, 10 A |
| Key illumination color | Red |
| Number of optical discs | 1 discs |
| Cables included | DC |
| Operating temperature (T-T) | -10 - 60 °C |
Weight and Dimensions| Weight | 1300 g |
|---|---|
| Dimensions (WxDxH) | 182 x 159 x 53 mm |
