18
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select [
AUDIO CONTROL
], then press the
knob.
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
(or using RC-406)
1 Press AUD to enter [
AUDIO CONTROL
].
2 Press to select an item, then press .
To return to the previous setting item, press
.
Default:
XX
SUB-W LEVEL –50
to
+10
(
0
): Adjusts the subwoofer output level.
MANUAL EQ
BAND1 LEVEL LEVEL
–9
to
+9
(
0
):(Refer to
BAND2 LEVEL
below.)
BASS EXTEND ON
:Turns on the extended bass.;
OFF
:Cancels.
BAND2 LEVEL
to
BAND13 LEVEL
–9
to
+9
(
0
): The sound elements (frequency level, tone level, Q factor)
are preset into each selection (
BAND1 LEVEL
to
BAND13 LEVEL
).
Adjusts the level to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
Q FACTOR 1.35
/
1.50
/
2.00
:Adjust the quality factor.
PRESET EQ NATURAL
/
ROCK
/
POPS
/
EASY
/
TOP40
/
JAZZ
/
POWERFUL
/
USER
:
Selects a preset equalizer suitable to the music genre. (Select [
USER
] to
use the settings made in [
MANUAL EQ
].)
BASS BOOST LEVEL1
/
LEVEL2
/
LEVEL3
/
LEVEL4
/
LEVEL5
or
LV1
/
LV2
/
LV3
/
LV4
/
LV5
:Selects your preferred bass boost level.;
OFF
:Cancels.
LOUDNESS LEVEL1
/
LEVEL2
or
LV1
/
LV2
:Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level.;
OFF
:Cancels.
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
VOLUME OFFSET –15
to
+6
(
0
):Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
(Not applicable for TUNER source and AUX source.)
ON
:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression.;
OFF
:Cancels.
SPACE ENHANCE
(Not applicable for TUNER source.)
SMALL
/
MEDIUM
/
LARGE
or
SML
/
MED
/
LRG
:Virtually enhances
the sound space.;
OFF
:Cancels.
SND REALIZER LEVEL1
/
LEVEL2
/
LEVEL3
or
LV1
/
LV2
/
LV3
:Virtually makes the
sound more realistic.;
OFF
:Cancels.
STAGE EQ LOW
/
MIDDLE
/
HIGH
or
LOW
/
MID
/
HI
:Virtually adjust the sound
position heard from the speakers.;
OFF
:Cancels.
DRIVE EQ ON
: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres.;
OFF
:Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected
(
5
)
, 2-way
crossover or 3-way crossover setting items will be shown.
(
19, 20
)
By default, 2-way crossover type is selected.
X ‘ OVER
• : For 2-way crossover: [
SUB-W LEVEL
]/ [
SUBWOOFER SET
] is
selectable only if [
SWITCH PREOUT
] is set to [
SUB-W
]. (
5
)
• [
SUB-W LEVEL
] is selectable only if [
SUBWOOFER SET
] is set to [
ON
].
JS_KWD_KDC_BT600U_MNHN_EN_6.indd 18JS_KWD_KDC_BT600U_MNHN_EN_6.indd 18 30/9/2015 1:43:29 PM30/9/2015 1:43:29 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
